Carter Carburetor Repair - Part3 <<  <   >  >> The float is held in by two screws: The old carb had an intake remainder measurement of 30 on my calipers: The new one has a remainder measurement of 60. So, the new one is .03 inches bigger: Now, it turns out that the only difference is the inside part. The channels start at the same point: There are 5 parts to this article: Part 1 Part 2 Part 3 Part 4 Part 5 This article comes from Fix Rambler: http://www.fixrambler.com/ The URL for this story is: http://www.fixrambler.com/art13.html Copyright 2004-2012 FixRambler.com. Read our Terms of Use.